 |
|
  |
Morson Projects was asked to produce an analysis of the car park (parking garage) to show that the mechanical ventilation would provide a minimum number of air changes per hour and what is known as an eight-megawatt fire to show that the ventilation system will clear smoke adequately enough within 60 seconds.
|
|
|
  |
At Nypromold, CFdesign has replaced guesswork with accurate, concise data that gives their engineers the confidence they need to design and build molds right the first time.
|
|
|
  |
When Severstal North America recently rebuilt one of its blast furnaces, they faced a challenge: the emission control system had to be designed for a casthouse that didn’t yet exist. The project would have been difficult – maybe nearly impossible – without the help of SNC-Lavalin's engineering services and the use of CFdesign.
|
|
|
  |
Fluidnet used CFdesign to help revolutionize the IV therapy market with a fully featured infusion pump that weighs less than two pounds and fits in the palm of a hand. A key to success was the design of a new generation of flow sensor and flow resistor for the administration set used with the IV pump.
|
|
|
  |
ÖZ-KAN Makina is an innovative company devoted to designing and manufacturing butterfly, check and air release valves for raw, drinking and sea water applications. When the engineering team was tasked with designing 2.5 m-seat-diameter valves to be installed over 10,000km from their Izmir factory, they invested in CFdesign to ensure success.
|
|
|
  |
Black Dot Technology, Inc was founded in 2007 with a mission to develop advanced coding systems that are environmentally friendly, easy to use, and have low maintenance. Using CFdesign on an electronic printer imaging module, engineers were able to lower power consumption, increase ink reservoir heat-up times and maintain a safe circuit board operating temperature.
|
|
|
  |
Parker Hannifin is the world's leading manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile, industrial and aerospace markets. Using Upfront CFD engineers were able to solve an 18 month long design headache in 4 weeks.
|
|
|
  |
Genesys Engineering worked with engineers from Blue Ridge Numerics to deliver an HVAC redesign for the Yale School of Medicine laboratory.
|
|
|
  |
Cornell Pump Company has been helping set the industry standard for premium quality, efficient centrifugal pumps since 1946. Using the new CFdesign Motion and HPC modules they were able to generate a complete pump performance curve in 2 hours.
|
|
|
  |
Founded in 1994, ECT Industries is renowned for its design, engineering, and manufacturing expertise in electronic systems. When ECT Toulon secured a contract to develop and produce avionic racks for military and civilian applications, the implementation of CFdesign became mission critical in order to guarantee rack thermal management performance and reliability.
|
|
|
  |
Founded in 1922, Bongard is the French specialist of bakery and pastry equipment. For more than a year, Bongard's been using CFdesign for product development. Recently CFdesign was used to solve overheating problems in a new double circuit rotary oven. CFdesign also helped Bongard engineers optimize the air speed to ensure uniform baking in the oven and exhaust through the ventilation hood.
|
|
|
  |
Aprilaire introduced the first evaporative flow-through-design humidifiers in 1954 and has been a technology leader ever since. CFdesign is a vital in their never-ending quest to walk the thin line between too much and too little humidity.
|
|
|
  |
At BittWare, a leading supplier of hybrid signal processing boards, CFdesign is the tool of choice to find the right balance of power, conductivity, weight, size and ruggedness.
|
|
|
  |
Daktronics is one of the world’s largest suppliers of electronic scoreboards, computer-programmable displays, digital billboards, and large-screen video displays and control systems.
|
|
|
  |
At Wolf Appliance, Inc. CFdesign upfront CFD software has become integrated into the product development process for the company’s full range of products, including wall ovens, warming drawers, cooktops and dishwashers.
|
|
|
  |
SureFire, maker of high-end illumination tools for the U.S. military and law enforcement officers, credits upfront CFD for a key role in the design success of the X400, the first weapon-mounted assembly to combine an LED flashlight with a red targeting laser.
|
|
|
  |
Hirschmann Automation and Control GmbH offers a complete, integrated infrastructure for data communication throughout the customer enterprise. This respected global company is recognized for innovative, high-quality industrial Ethernet and electronic control systems such as their Octopus Series.
|
|
|
  |
Fuji Heavy Industries Ltd. mission is to deliver compact, economical, high output and high efficiency engines for generators, agricultural machinery, industrial equipment, and all-terrain vehicles like dune buggies and snow mobiles, Fuji Heavy Industries employs the upfront CFD approach and has integrated CFdesign flow and thermal analysis software into their early design process.
|
|
|
  |
Elster Kromschroeder is the global market leader for bellows gas meters, the company portfolio covers gas meters for domestic households and commercial premises, safety valves and controller components for heating systems as well as systems for measuring and controlling industrial heating processes
|
|
|
  |
Finish Thompson, a designer and manufacturer of chemical process, drum and barrel pumps, used CFdesign upfront CFD software to double the efficiency of a new line of magnetic drive pumps while reducing total product development time by an estimated 33 percent.
|
|
|
  |
Betts had the opportunity to redesign its vents that reside on top of gasoline trailers. The vents help ensure safety by normalizing pressure and vacuums that build up within the tank.
|
|
|
  |
Macrolink uses CFdesign to conduct early-stage flow and thermal analyses on ruggedized electronics enclosures for avionic, mobile and fixed applications. They engineer rugged ATR chassis, COTS chassis, portable rugged workstations and SCSI & Fibre Channel storage systems to meet the most demanding environmental requirements.
|
|
|
  |
Berner uses CFdesign to assist and accelerate the development of air doors that can stop 30 mpg gusts and work in openings up to 30-ft high. The ability to conduct extensive early stage design reviews prior to the construction of a physical prototype gives Berner engineers the ability to efficiently sort through all the ‘what ifs’ until all product quality and innovation objectives are achieved.
|
|
|
  |
Xan3D Technologies Hybrid IC processes can compress what are today's modules, and even systems, down to individual chips. On a new project, preliminary design evaluations done in CFdesign revealed that traditional fin and pin fin heat sink design configurations simply could not keep the maximum case temperature below 80° C. A new revolutionary heat sink design was created using SolidWorks® and CFdesign.
|
|
|
  |
Sechan Electronics was tasked with developing a new digital fire control system for the Paladin self-propelled Howitzer. Soldiers count on the reliability of this unit and Sechan backed it with a protracted warranty, so the engineering team used Pro/ENGINEER® and CFdesign to insure maximum reliability and performance.
|
|
|
  |
Imperial Oil, an important customer to the Velan Valve Corporation, needed a forged globe valve with a high flow coefficient and they needed it fast.
|
|
|
  |
Packaging powerful 4D digital imaging functionality and voice-activated controls within a compact, ergonomic design, the iU22 from Philips Medical is truly a next-generation ultrasound system.
|
|
|
  |
Eastern Instruments develops highly engineered flow measurement devices for highly demanding industrial applications. The company serves it customers by cost-effectively designing fully customized systems based on their proprietary product lines.
|
|
|
  |
Getting high flow rates through a compact, lightweight, pneumatic valve system looked like a horrendous task to design engineer, Tim Gaddy, until he put CFdesign to the challenge.
|
|
|
  |
The product development team for Top-Flite golf balls uses CFdesign to drive innovation from the tee to the green.
|
|
|
  |
Read how a leader in transmission-control solenoid valves uses CFdesign to reduce project costs, shrink cycle times, and increase customer confidence.
|
|
|
  |
Using CFdesign in conjunction with Pro/ENGINEER® as part of the early product design process, this innovator of network intrusion prevention systems delivered mission-critical technology to market on- time and on budget.
|
|
|
  |
Test Equipment for the semiconductor industry is serious business. That’s why Credence uses CFdesign to make sure their systems can handle the heat.
|
|
|
  |
The Conval team built a 3D model of the system in Pro/ENGINEER® and launched a flow simulation in CFdesign.
|
|
|